Class D(type 3) Power Surge Protector introduction:
This series modular power surge protective device is designed according to IEC standard and GB standard. 35mm rail mounting type, and applying in third-class in 1-phase power supply system, usually installted at lightning protection zone 1-3or lightning protection zone 2-3.
This series modular power surge protective device has High-current delivery capacity, and the maximum discharge current can up to 20KA. The core element of the modular SPD is MOV lightning module.
These series modular power surge protective devices have no continuous flow to avoiding current break off.
1. high discharge capacity
2. low voltage protection level
3. High speed response
4. Operating state indicator
5. Inner circuit over-current
6. Inner over-thermal breaker
7. Easy for mounting ,apply in IT/TT/TN system
8. Mounting with standard modularize
9. Remote control interface
Parameter of power spd
Model number
|
TS-D216
|
Nominal voltage Un
|
220VAC/230VAC
|
AC110V
|
AC 24 V
|
DC 12 V
|
Nominal voltage Uc
|
255VAC/275VAC
|
AC180 V
|
AC 30 V
|
DC 15 V
|
Voltage protection level Up
|
≤1000V
|
≤270 V
|
≤80 V
|
≤32 V
|
Nominal discharge currentIn 8/20μS
|
10KA
|
Max.discharge current Imax 8/20μS
|
20KA
|
Response time (ta)
|
≤25 ns
|
Max.backup fuse
|
16 A TS-FD-Ⅲ
|
Connector
|
parallel
|
Installation
|
35mm standard rail
|
Degree of protection
|
IP20
|
Cross-sectional area
|
Min.:≥6m 2 LN≥10 2 PE
|
facult indicator
|
yes
|
Enclosure material
|
red thermoplastic UL94-V-0
|
Dimension
|
89×36×63 mm
|
Installation
|
Class D
|
Standards
|
IEC 61643-1:2005,GB18802-2002,GB503432004
|